Porterfield Airplane Club

Keep the Skinny Birds Flying Safely

Andy Gelston's Discussions (191)

Search Forum

View

Discussions Replied To (122) Replies Latest Activity

"I have a pair of WWII era switches that have the phosphorescent bulbs on the ends of…"

Andy Gelston replied May 26, 2016 to -65 Ignition (Mag) Switches Needed

 1 May 26, 2016
Reply by Andy Gelston

"Do you know if they bought just the existing hardware, or the tooling and manufactur…"

Andy Gelston replied May 26, 2016 to Wheels and Brakes

 3 Jun 2, 2016
Reply by David Talley

"You are correct, Bob.  The fuselage is the same for all three engines.  Only the bol…"

Andy Gelston replied Mar 30, 2016 to Detailed Drawings

 2 Mar 30, 2016
Reply by Andy Gelston

"Joe Rankin has the instrument panel drawing in pdf and hard copy.  There were two ve…"

Andy Gelston replied Nov 21, 2015 to RESTORATION OF A BARNFIND COLLEGIATE

 6 May 24, 2016
Reply by David Talley

"I had to rebuild the top of the rudder, make new wing struts, and install the landin…"

Andy Gelston replied Nov 14, 2015 to RESTORATION OF A BARNFIND COLLEGIATE

 6 May 24, 2016
Reply by David Talley

"Well, if you want to do a ground-up restoration, start at the ground and work your w…"

Andy Gelston replied Nov 10, 2015 to RESTORATION OF A BARNFIND COLLEGIATE

 6 May 24, 2016
Reply by David Talley

"Over at Joe's Aeronca website, they posted this for what they're using on Champs: Jo…"

Andy Gelston replied Apr 21, 2015 to gas tank filler neck bushing

 5 Sep 22, 2016
Reply by Andy Gelston

"Hi Trevor, I've been involved with exporting Yank birds down under to Oz, and the FA…"

Andy Gelston replied Sep 24, 2014 to Help required for type certificate data for our Australian Porterfield

 2 Sep 25, 2014
Reply by Trevor Bange

"Joe Rankin has all the drawings, and most of them are still legible.  However, in th…"

Andy Gelston replied Sep 24, 2014 to NC17026 C/N 225 Restoration Help Requested

 2 Sep 25, 2014
Reply by Karl D. Engelskirger

"Okay, I couldn't find one of these boogers anywhere, so I sprayed it with several co…"

Andy Gelston replied Sep 15, 2014 to gas tank filler neck bushing

 5 Sep 22, 2016
Reply by Andy Gelston

RSS

About

Tom Porterfield created this Ning Network.
Create a Ning Network! »

© 2024   Created by Tom Porterfield.   Powered by

Report an Issue  |  Terms of Service

Free Web Counter
Free Web Counter