Keep the Skinny Birds Flying Safely
Porterfield cp65 nose bowl
Replies to This Discussion
-
Permalink Reply by Andy Gelston on
-
If you're not a purist, and will tolerate having a fiberglass nosebowl, Tim Talen has the mold for them. He's a Club member, so you can contact him directly through the Members section. You'll need a Form 337 for it, as an owner manufactured part, and I can help you with that if you need it.
-
Permalink Reply by Trevor Burns on
-
I have the fiber glass nose on mine as the old one was not salvageable after sitting as a project for 60ish years. Works great!
-
Permalink Reply by kevin feauto on
-
Thank you!
-
Permalink Reply by Rex Porter on
-
If you are still interested, I believe I have an aluminum nose bowl. Actually I have a couple of them. They are in definite need of repair.
-
-
I would b very good nterested
-
-
kevin feauto said:I would b very good nterested
-
-
Ok. Contact me at rexporter00@gmail.com.
-
Permalink Reply by Christine Detwiler
-
Hello!
I'm putting out feelers for a nose bowl for a 1940 LP-65 Collegiate. I’m the newest owner of N27281. In our mound of parts we are obviously missing a few small items like a nose bowl and wing struts. Do you happen to have either of these items? I’m still getting parts cleaned off and shelves are coming soon. I’ve sent a message to Tim Talen for a possible nose bowl mold. Whatever info you have on these parts would be helpful. Thanks! Christine
About
© 2025 Created by Tom Porterfield.
Powered by
